Bed composition parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
posdwn |
- |
Bathymetry is specified positive down (1) or positive up (-1) |
nx |
- |
Number of computiation cell corners in x-direction |
Bed update numerics parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
Constants, not read in params.txt
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
Coriolis force parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
Discharge boundary conditions
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
Drifters parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
Flow boundary condition parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
Flow numerics parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
Flow parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
Grid parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
posdwn |
- |
Bathymetry is specified positive down (1) or positive up (-1) |
nx |
- |
Number of computiation cell corners in x-direction |
ny |
- |
Number of computiation cell corners in y-direction |
alfa |
deg |
Angle of x-axis from East |
vardx |
- |
Switch for variable grid spacing: 1 = irregular spacing, 0 = regular grid spacing |
dx |
m |
Regular grid spacing in x-direction |
dy |
m |
Regular grid spacing in y-direction |
Groundwater parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
Initial conditions
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
MPI parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
Model time
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
Morphology parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
posdwn |
- |
Bathymetry is specified positive down (1) or positive up (-1) |
Non-hydrostatic correction parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
Output variables
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
posdwn |
- |
Bathymetry is specified positive down (1) or positive up (-1) |
nx |
- |
Number of computiation cell corners in x-direction |
ny |
- |
Number of computiation cell corners in y-direction |
alfa |
deg |
Angle of x-axis from East |
vardx |
- |
Switch for variable grid spacing: 1 = irregular spacing, 0 = regular grid spacing |
dx |
m |
Regular grid spacing in x-direction |
dy |
m |
Regular grid spacing in y-direction |
xfile |
name |
Name of the file containing x-coordinates of the calculation grid |
yfile |
name |
Name of the file containing y-coordinates of the calculation grid |
xori |
m |
X-coordinate of origin of axis |
yori |
m |
Y-coordinate of origin of axis |
thetamin |
deg |
Lower directional limit (angle w.r.t computational x-axis) |
thetamax |
deg |
Higher directional limit (angle w.r.t computational x-axis) |
dtheta |
deg |
Directional resolution |
thetanaut |
- |
Thetamin,thetamax in cartesian (0) or nautical convention (1) |
tstop |
s |
Stop time of simulation, in morphological time |
CFL |
- |
Maximum Courant-Friedrichs-Lewy number |
tunits |
- |
Units can be defined in udunits format (seconds since 1970-01-01 00:00:00.00 +1:00) |
Physical constants
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
Physical processes
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
Q3D sediment transport parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
Roller parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
Sediment transport numerics parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
Sediment transport parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
posdwn |
- |
Bathymetry is specified positive down (1) or positive up (-1) |
nx |
- |
Number of computiation cell corners in x-direction |
ny |
- |
Number of computiation cell corners in y-direction |
alfa |
deg |
Angle of x-axis from East |
vardx |
- |
Switch for variable grid spacing: 1 = irregular spacing, 0 = regular grid spacing |
dx |
m |
Regular grid spacing in x-direction |
dy |
m |
Regular grid spacing in y-direction |
xfile |
name |
Name of the file containing x-coordinates of the calculation grid |
yfile |
name |
Name of the file containing y-coordinates of the calculation grid |
xori |
m |
X-coordinate of origin of axis |
yori |
m |
Y-coordinate of origin of axis |
thetamin |
deg |
Lower directional limit (angle w.r.t computational x-axis) |
Tide boundary conditions
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
Variables, not read in params.txt
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
Wave boundary condition parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
posdwn |
- |
Bathymetry is specified positive down (1) or positive up (-1) |
nx |
- |
Number of computiation cell corners in x-direction |
ny |
- |
Number of computiation cell corners in y-direction |
Wave breaking parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
Wave numerics parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
Wave-current interaction parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
Wave-spectrum boundary condition parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |
nonh |
- |
Non-hydrostatic pressure option: 0 = NSWE, 1 = NSW + non-hydrostatic pressure compensation Stelling & Zijlema, 2003 |
gwflow |
- |
Turn on (1) or off (0) groundwater flow module |
q3d |
- |
Turn on (1) or off (0) quasi-3D sediment transport module |
depfile |
- |
Name of the input bathymetry file |
posdwn |
- |
Bathymetry is specified positive down (1) or positive up (-1) |
nx |
- |
Number of computiation cell corners in x-direction |
ny |
- |
Number of computiation cell corners in y-direction |
alfa |
deg |
Angle of x-axis from East |
Wind parameters
swave |
- |
Include short waves (1), exclude short waves (0) |
lwave |
- |
Include short wave forcing on NLSW equations and boundary conditions (1), or exclude (0) |
flow |
- |
Include flow calculation (1), or exclude (0) |
sedtrans |
- |
Include sediment transport (1) or exclude (0) |
morphology |
- |
Include morphology (1) or exclude (0) |